Skip to main content
Samples available UK-wide delivery

Your Basket

0

Your basket is empty

Browse our editorial collections and find your perfect floor.

Browse Collections
Subtotal £0.00
Shipping & discounts calculated at checkout
SSL encrypted — safe and secure

Corby · Northamptonshire

Engineered Wood Flooring in Corby

Engineered oak is a real oak wear layer of 3 to 6 mm bonded to a cross-laminated core, so the board keeps the surface of solid timber and moves far less with the seasons. In Corby 89% of homes are houses, most of them semi-detached houses (35%), so the questions are the subfloor and the underlay rather than impact sound.

Engineered Wood in Corby

Engineered Wood flooring in Corby: what the housing says

The North Northamptonshire district counts 148,918 households in the 2021 census, and the mix of houses and flats in that count is what decides how a engineered wood floor is specified here.

Semi-detached houses are the largest group in Corby, 35% of the North Northamptonshire stock, and the typical semi has two ground floors in one: a suspended timber front room and a solid concrete kitchen or later extension. Engineered oak can run through both, floated on underlay over the timber and glued to the slab, so a knocked-through room reads as one floor. The join between the two bases is where the level is set, and it is worth checking before the boards are ordered.

Detached houses are 30% of the North Northamptonshire stock, above the national picture, and they bring larger, longer rooms to Corby. That favours the wider boards: a 190 or 220 mm plank fills a big reception room calmly, where a 125 mm board reads as busy. It also means more square metres in one batch, and a batch is the unit that keeps the colour consistent across the room, so the whole order goes in at once.

Owner-occupation is 66% in North Northamptonshire, higher than in most districts, and an owner-occupier buys a floor to keep. That is the case for the thicker wear layers in the range: 4 mm on the 15 mm Victorian boards and 6 mm on the 20 mm ones can be sanded and refinished more than once, so a floor laid in Corby this year is still the same floor after the next redecoration and the one after that.

of households rent privately (14.1% in 2011)
18.4%
live in a flat or maisonette
11.2%
postcode districts we deliver to
NN17 to NN18
engineered wood floors in our range
33

Source: ONS, Census 2021, North Northamptonshire (E06000061) · Postcode districts: postcodes.io (ONS geography) · Range: our product catalogue

Compare the engineered wood range

The range runs from the 125 mm Ascot boards, which suit a hallway or a bedroom in a terraced house, through the 150 mm Cobham range to the 190 mm Weybridge Light Grey and the 220 mm Victorian Antique Natural Oak for larger rooms. Every board in the range is listed as compatible with underfloor heating and carries a wear layer of 3 mm or more; the 15 and 20 mm Victorian boards carry 4 and 6 mm.

ProductFormatWear layer / thicknessFittingUnderfloor heating
Victorian Antique Distressed Oak Flooring 14 x 190 x 190014mm x 190mm x 1900mm3mmTongue & GrooveCompatible
Victorian Antique White Oak Flooring 15 x 220 x 220015mm x 220mm x 2200mm4mmTongue & GrooveCompatible
Ascot Lacquered Oak Wood Flooring 14 x 12514mm x 125mm x 300-1200mm3mmTongue & GrooveCompatible
Cobham Natural Oak UV Lacquered Wood Floor 14 x 15014mm x 150mm x 300-1200mm3mmTongue & GrooveCompatible
Cobham Walnut Stained Oak Wood Floor 14 x 15014mm x 150mm x 300-1200mm3mmTongue & GrooveCompatible
Weybridge Light Grey Oak Wood Flooring 14 x 190 x 190014mm x 190mm x 1900mm3mmTongue & GrooveCompatible
Weybridge White Oiled Oak Wood Flooring 14 x 190 x 190014mm x 190mm x 1900mm3mmTongue & GrooveCompatible
Victorian Antique Smoky Oak Flooring 20 x 190 x 190020mm x 190mm x 1900mm6mmTongue & GrooveCompatible

Room by room

Engineered Wood in Corby, room by room

  • Room

    Living rooms in Kingswood and Corby Village

    Since the base starts out flat, the decision in a living room here turns on how the floor feels underfoot rather than on what has to be corrected below it. A dense underlay beneath engineered oak kills the hollow note a floating floor makes over bare concrete.
    Living Room flooring in Corby

Our Northamptonshire delivery covers: Oakley, Danesholme and Great Oakley and the NN postcode area

See it on the map

Local fact sheet

Corby's homes, by the numbers

North Northamptonshire in the 2021 census: 148,918 households, 88% houses, 11% flats.

Corby is NN17 and NN18 — Corby West, Kingswood, Lloyds and Corby Village, Oakley, and out to Gretton and Weldon and Geddington and Stanion. It sits in North Northamptonshire, a unitary authority created in 2021. Ownership across the authority was 65.0% at the 2021 census, down 3.1 points, with private renting up 4.3 points to 18.4%. Corby's own housing story is distinctive: it was designated a new town in 1950 to house steelworkers, and most of what was built then and since sits on a concrete ground floor rather than joists. That simplifies levelling and complicates moisture — the damp-proof membrane is the check that matters, and a floating floor over a good underlay is usually the straightforward answer.

Corby was laid out as a new town for steelworkers, and that decision still shows underfoot: most of what has been built there since sits on a concrete slab rather than timber. Semis lead the mix in NN17 and NN18, with detached and terraced homes close behind, and private renting has risen.

A concrete ground floor keeps still through the heating year, so seasonal gapping between boards is not the Corby problem; the movement to allow for belongs to the floating floor. The slab holds cold instead, and the underlay decides whether a room feels warm underfoot.

Delivery times and options depend on the delivery postcode. See Delivery & Returns for the applicable estimate.

Guides

Before you choose

Before you order in Corby

  • Which base, exactly Suspended timber or a slab, and how flat it is under a straightedge. That decides the method and the underlay before it decides the board.
  • Room climate before, not after The boards acclimatise in the room they will be laid in, with the heating running as it will in service. The Contract Flooring Association puts this at 48 hours.
  • One batch for the whole room Measure, add the waste allowance for a straight plank, and order in one go. A top-up from a later batch can differ in shade.
  • Two bases in one house The typical semi has a suspended timber front room and a solid kitchen or extension. Float over underlay on the timber, glue or float on the slab, and set the level at the join before ordering.
  • Long runs need their joints A floated board runs only as far as the fitting instructions allow before an expansion joint. In a large detached room, plan the break at a doorway or under a threshold strip.
  • Wear layer for the decades The 4 and 6 mm wear layers on the 15 and 20 mm Victorian boards take more than one sanding. Keep the invoice with the batch number.

Reviews

Trusted by homeowners across the UK

★★★★★4.6/5Trustpilot
★★★★★4.9/5Google

Questions

Engineered Wood flooring in Corby: questions, answered

Is engineered wood a good choice for a Corby home?

For most of the housing in Corby it is the wood floor that fits: it goes over a suspended timber floor once that is levelled, over a slab once that is dry, and over underfloor heating, and it can be sanded back when the wear layer is 3 mm or more. Where it does not belong is a bathroom or a utility room that gets wet.

Which engineered boards suit older houses in Corby?

A 125 or 150 mm board suits the room sizes of the terraces and semis, and a brushed, oiled finish forgives the grit an older house carries in. Wider boards suit the larger detached rooms and knocked-through spaces.

Can I fit engineered oak over underfloor heating in Corby?

Every engineered board in the range is listed as compatible with underfloor heating. The conditions are the manufacturer's: a commissioned system, a dry screed and a surface temperature within the limit the fitting instructions state.

Which flooring is best for Corby homes?

Settle where the floor stops before you settle what it is. Nothing under a Danesholme or Kingswood slab forces a break, so put the changeover in a door that closes, give the wetter room the harder surface, and let one board run through everything beyond it.

Do you deliver engineered wood flooring to Corby?

Yes. We deliver across Corby and Northamptonshire from our UK warehouse, including the NN17 and NN18 postcode districts. Delivery cost and timing depend on the delivery postcode and are shown at checkout, and samples come by post first so the floor can be seen in the room before the full order.

Can I see a engineered wood sample before ordering in Corby?

Yes: cut samples are £1.99 each, up to two per product, posted to your Corby address. Two or three side by side on the floor, in the room's own light morning and evening, settle the colour faster than any photograph.

The same range nearby

Engineered Wood flooring nearby

Distances are straight-line miles from Corby. Each link opens the engineered wood page for that town.

KetteringNorthamptonPeterboroughLeicesterSt NeotsBedfordLoughboroughCorby

United KingdomNorthamptonshireCorbyEngineered Wood

151 towns and cities, 24 county guides, one map.

Order samples£1.99 each · up to 10 per order

Order
Newsletter

New ranges and offers. Hear it first.

Unsubscribe anytime