LVT Vinyl Flooring in Walsall

For most kitchens in Walsall it is the floor that fits: listed as waterproof, warm and quiet compared with a tile, click-fitted over timber or slab, and with a 0.55 mm wear layer rated for the traffic. The base under it still has to be dry, which is checked rather than assumed.

SPC is a type of LVT with a rigid solid polymer core rather than a flexible one. Every LVT in this range is SPC. The rigid core is what lets the board bridge small unevenness in an old floor and stay flat over underfloor heating.

The range carries 0.3 and 0.55 mm. The thicker layer is the one for a kitchen, a hallway or a home with pets; the thinner one suits a bedroom or a lightly used bathroom. EN ISO 10582 does not tie a class to a thickness, so the choice is the manufacturer's guidance and the room.

Yes, provided the slab is dry, flat and clean — in that order. Take a moisture reading first, level what the reading and a straightedge show, then choose between click and glue-down. Glue-down sits lower and feels solid underfoot; click is quicker and can be lifted.

Yes. We deliver across Walsall and West Midlands from our UK warehouse, including the WS1, WS2, WS4 and WS5 postcode districts. Delivery cost and timing depend on the delivery postcode and are shown at checkout, and samples come by post first so the floor can be seen in the room before the full order.

Yes: cut samples are £1.99 each, up to two per product, posted to your Walsall address. Two or three side by side on the floor, in the room's own light morning and evening, settle the colour faster than any photograph.