Solid Wood Flooring in Bedford

For a room with a timber floor structure and a steady climate, yes: it is fixed to the joists as the original floor was, and it can be sanded and refinished for decades. For a concrete ground floor, a flat with a sound clause or a heated screed, the engineered range is the right oak.

The solid range is not listed for underfloor heating. Every engineered board in the range is, so a heated floor in Bedford points to that range.

Keep the room climate steady, keep grit off the surface with a mat at the door, and clean it dry or barely damp. An oiled floor is re-oiled where it wears; a lacquered one is recoated when the film dulls. The care guides linked below take each finish in turn.

In a period house the first decision is whether this is a replacement or an overlay. An overlay leaves the original boards intact for a later owner and adds height at every door; a replacement loses them permanently. Decide that, and the choice of board follows easily.

Yes. We deliver across Bedford and Bedfordshire from our UK warehouse, including the MK40, MK41 and MK42 postcode districts. Delivery cost and timing depend on the delivery postcode and are shown at checkout, and samples come by post first so the floor can be seen in the room before the full order.

Yes: cut samples are £1.99 each, up to two per product, posted to your Bedford address. Two or three side by side on the floor, in the room's own light morning and evening, settle the colour faster than any photograph.