Chevron Flooring in Bradford

Herringbone is the traditional zig-zag and forgives a squarer room; chevron is the continuous arrow and wants a room with length. Chevron blocks are mitred, so the setting-out is less forgiving and the border matters more. The comparison guide takes it further.

Both Knightsbridge Chevron boards are engineered, 14 mm thick, and listed for underfloor heating, on a screed that is dry and a system that has been commissioned first.

The oak chevron is for dry rooms. For a patterned floor in a kitchen the rigid-vinyl herringbone, listed as waterproof, is the range to look at; there is no vinyl chevron in the range.

Many Heaton villas have a cellar under the front rooms, and that is worth knowing before you choose. It gives access to the underside of the floor, so insulation can go in from below without lifting a single board — and a cold villa floor is usually a cold void, not a thin covering.

Yes. We deliver across Bradford and West Yorkshire from our UK warehouse, including the BD1, BD2, BD3, BD4, BD5 and BD6 postcode districts. Delivery cost and timing depend on the delivery postcode and are shown at checkout, and samples come by post first so the floor can be seen in the room before the full order.

Yes: cut samples are £1.99 each, up to two per product, posted to your Bradford address. Two or three side by side on the floor, in the room's own light morning and evening, settle the colour faster than any photograph.